DELTA RS830 10-Inch 1-1/2-Horsepower Radial Arm Saw, 115/230-Volt 1-Phase

DELTA RS830 10-Inch 1-1/2-Horsepower Radial Arm Saw, 115/230-Volt 1-Phase From DELTA List Price: $2,650.00 Price: $1,437.45 & eligible for FREE Super Saver Shipping on orders over $25. Details Availability: Usually ships in 24 hours Ships from and sold by Amazon.com Average customer review:  (16 customer reviews)

---

Product Details

• Amazon Sales Rank: #56653 in Home Improvement
• Brand: DELTA
• Model: RS830
• Number of items: 1
• Dimensions: 28.50" h x 27.00" w x 45.00" l,

Features

• Cast-iron track, column and column support for rigidity and continued accuracy.
• Depth-of-cut control handle and locking levers are positioned above the table for easy access
• Steel stand for sturdy support
• Extra-large table provides support for wide panels or large work pieces
• Provides greater cutting capacity for crosscutting nominal 2-inch thick stock up to 16-inch wide; Miter cutting capacities in nominal 2-inch thick stock are 10-1/2-inch at 45 degree left and 11-inch at 45 degree right

---

Editorial Reviews

Amazon.com Product Description
The DELTA RS830 10-inch Professional Radial Arm Saw makes safe, accurate cuts each and every time, and it features a high-quality steel stand for sturdy support. Cut stock as wide as 16 inches with ease, and use the 10-inch blade to make miter cuts at up to a 45 degree angle. The RS830's cast-iron track and column provide exceptional support during cuts and minimize vibration. Depth-of-cut control handles are conveniently mounted above the table for easy access. For added versatility, DELTA fitted the RS830 with a dual-threaded shaft that accepts a wide range of accessories to expand the overall use of the saw.
From the Manufacturer
DELTA RS830 10-Inch 1-1/2 Horsepower Radial Arm Saw, 115/230-Volt 1 Phase

---

Customer Reviews

Most helpful customer reviews
58 of 58 people found the following review helpful.
the only choice on the market for rabbets and dados
By David J. Batten
I debated for a long time on whether to get this or one of the compound sliding miter saws. I needed something to do rabbet and dado cuts on long pieces of lumber, for making shelves and other furniture, and this was the only real choice on the market. The larger radial arm saws are way too expensive, and from what I read, the miter saws are only good for through cuts, not measured depth cuts.

A radial arm saw is also the only saw to buy if you're cutting oddly shaped items or doing really difficult cuts. It has adjustments on every axis, which makes it very versatile. I've seen people put a chuck on one of these and use it as boring machine and a router for odd shapes. Radial arm saws are almost completely off the market now, except for high end units, so this is the about average consumer's only choice for these kind of cuts.

This came very well packaged, and was easy enough for one person to set up. I had a little trouble leveling the table, and it seemes kind of cheezy the way it is done, but I finally got it right.

This saw generally has enough power, if you don't get in a bind with warped lumber, when it will stall out. This is probablly good, rather than a higher powered saw, which might throw the piece back at you.

My main complaint with this saw is the difficulty of adjustments, especially the height adjustment. Strangely enough, it is easier to raise the blade than to lower it. It goes up easy enough, but trying to lower it back down is very difficult, like it is adjusted too tight. I actually lifted the saw off the floor trying to turn the height lever to lower the blade. Since you have to raise it and lower it everytime you change miter or angle of cut, this can be quite a hassel.

There seems to be only a positive stop at 90 degrees, which I always double check, and the attached gagues aren't that accurate, so you've got to use a sliding protracter for any miter or angle cuts.

The floating lower blade guard gets stuck sometimes, and I ended fixing it in place in its highest position. At least the whole blade guard isn't totally useless like what comes on table saws.

Overall, a pretty good saw, but for the price I'd expect it to have better gauges and some positive stops, plus be easier to adjust. Sometimes I end up cutting a piece on the table saw because this is such a hassel to adjust. I've used this saw for furniture, and to rebuild my deck (a lot of wood hauling). For building projects, I may end up getting a 12" sliding compound miter saw yet. This is a good, but not great saw. A better one would cost twice as much.

UPDATE 2009:
I use this daily as my cross-cut and cut-off saw in the workshop, plus any rabbets and dados on long boards. After having this saw for almost 8 years, I still stand by the original review. However, I see the price has about doubled in that time, so it is no longer competative with one of the many miter saws on the market. If all you want is basic cut-offs and miters, go with one of those portable saws. For the price of this saw now, if you really want one, I'd look at the 12" model, which looks to have better adjustment measurments and controls.

I finally loosened the screws on the shaft slightly to make it easier to raise and lower the blade, and that made a huge difference. I built a hood around it from scrap plywood, with a dust port on the side and a hose on the connector over the blade guard. While this doesn't get all the dust, it does keep it from flying everywhere. This is an issue with any radial arm saw or miter saw. All in all, a good saw that I've never had a problem with, other than the tightness raising and lowering the blade.
49 of 53 people found the following review helpful.
Great saw; cheesy stickers!
By Robert J. Mohalski
This is the fourth radial arm saw I have owned. Like the previous ones, this saw takes time to set up and calibrate. Unlike the others however, the 10" Delta radial arm saw has held it settings well. I found the table a bit too low for my uses so I built a platform with casters to bring it up to a better working height. I removed the cheesy looking stickers that I suspect were the brainstorm of the marketing department. The saw has adequate power to handle thick hardwoods. I particularly like the safety of having the switch right under my thumb for prompt shut off if needed. Adding a Delta lamp has been useful in making accurate cuts. I am very pleased with this machine and wish I had purchased one earlier.
21 of 22 people found the following review helpful.
Some Good - Some not so good
By Bill Stephenson
The market for Radial saws is very limited in the $500.- $800. price bracket. I basicly had two choices a Delta or Ridgid. I purchased the Delta because it had a cast iron arm instead of stamped welded steel. The saw went together easily with the exception of leveling the table this took 3 attemps to get it right. The instructions for adjusting the saw were very clear and all the adjusting screws & bolts had a solid quality feel. I feel that this saw will hold its settings.The blade guard binds when it is rotated and must be jiggled to move it.( a little sanding may smooth things out.) The controls for adjusting the height and all other adjustments work very smoothly. The blade & motor unit was a little hard to slide on the arm and had to be adjusted. ( still not as free & smooth as the Ridgid but not a problem ) My first cut was right on the money
a solid 90 Deg. A nice feature is a switch on the motor to change from 115 V to 220V. I have not used the saw much but the more I use it and become familiar with it the more confident I become that I made the right choice. Cross cutting wide lumber is what ths saw is all about & that it does well. If the blade guard moved smoothly I would have given this saw five stars.
See all 16 customer reviews...