 | Ridgid R4120 Saw, 12-Inch Compound Miter with Laser |
2 new or used available from $220.00
Average customer review:
(5 customer reviews)
Product Description
Includes 15 Amp, 12-in Compound Miter Saw With Exactline Adjustable Laser - ZRR4120Product Details
- Amazon Sales Rank: #17182 in Home Improvement
- Brand: Ridgid
- Model: R4120
Features
- Ergonomic D-Handle ? for improved grip and handling
- 15 Amp Motor ? heavy duty motor powers through the most difficult cuts
- Work Clamp with Quick-Release Lever ? securely holds material in place
- Sliding Miter Fence ? provides support for wider material. Adjusts for bevel cuts
- Repeat-A-Cut Marking Surface ? allows user to mark fence for repetitive cuts
Editorial Reviews
From the Manufacturer
Ridgid R4120 12-inch Compound Miter Saw with Laser features ergonomic D-handle for improved grip and handling. The 2-1/2-inch dust port provides connection to standard dust collection systems to help keep work area clean. The 15 Amp heavy duty motor powers through the most difficult cuts. Repeat-A-Cut marking surface allows user to mark fence for the repetitive cuts. Work clamp with quick-release lever securely holds material in place. Left side Table Extension for increased material support. Sliding miter fence provides support for wider material adjusts for bevel cuts. Extended bevel and miter ranges are -3 degrees to 48 degrees bevel and 0 degrees to 47 degrees miter capacities accommodate a wide variety of cuts. Sof-touch controls improve comfort and grip. Specifications: Motor: 120 V, AC only, 15 Amps, No Load Speed: 4,000 r/min. (RPM), Blade Arbor: 1 in., Blade Diameter: 12 in., Weight: 49 lbs. Cutting Capacities: Baseboard Against Fence: 4 3/4 in., Crown Molding Laying Flat: 6 1/2 in., Baseboard Laying flat: 7 7/8 in., 90 degrees Cross Cut (nominal): 2 in. x 8 in. or 4 in. x 4 in., 45 degree Miter Cut (nominal): 2 in. x 6 in., 45 degree Bevel Cut (nominal): 2 in. x 8 in. Includes MS1250 Miter Saw, Exactline adjustable laser guide, table extension, carbide tipped blade, dust bag, dust guide, work clamp, blade wrench, hex keys, operator's manual.
Ridgid R4120 12-inch Compound Miter Saw with Laser features ergonomic D-handle for improved grip and handling. The 2-1/2-inch dust port provides connection to standard dust collection systems to help keep work area clean. The 15 Amp heavy duty motor powers through the most difficult cuts. Repeat-A-Cut marking surface allows user to mark fence for the repetitive cuts. Work clamp with quick-release lever securely holds material in place. Left side Table Extension for increased material support. Sliding miter fence provides support for wider material adjusts for bevel cuts. Extended bevel and miter ranges are -3 degrees to 48 degrees bevel and 0 degrees to 47 degrees miter capacities accommodate a wide variety of cuts. Sof-touch controls improve comfort and grip. Specifications: Motor: 120 V, AC only, 15 Amps, No Load Speed: 4,000 r/min. (RPM), Blade Arbor: 1 in., Blade Diameter: 12 in., Weight: 49 lbs. Cutting Capacities: Baseboard Against Fence: 4 3/4 in., Crown Molding Laying Flat: 6 1/2 in., Baseboard Laying flat: 7 7/8 in., 90 degrees Cross Cut (nominal): 2 in. x 8 in. or 4 in. x 4 in., 45 degree Miter Cut (nominal): 2 in. x 6 in., 45 degree Bevel Cut (nominal): 2 in. x 8 in. Includes MS1250 Miter Saw, Exactline adjustable laser guide, table extension, carbide tipped blade, dust bag, dust guide, work clamp, blade wrench, hex keys, operator's manual.
Customer Reviews
Most helpful customer reviews9 of 9 people found the following review helpful.
Good Basic Miter SawBy C. Aumack
I've had this saw for about six years and can't really complain. It's a pretty good saw for the price. It's not top of the line, but neither is the price. I have had no problems in the time I have owned it. I replaced the blade with a 12" Freud Diablo and it cuts great. Smooth cuts every time. The dust collection is just OK. Even with a shop vac hooked up there will still be some saw dust that doesn't go in the collection port. The laser works great. Just remember that the laser will be 1/16" to the left of where the cut will be. That's because the laser is mounted on the sawblade/arbor. It uses some small batteries and only turns on when the saw is running because the switch works by centripetal force. With light use, the laser's batteries lasted about 4 or 5 years. They were easy to change. The miter action works fine. I wouldn't call it smooth (like some of the higher-end saws, like the Bosch) but it's not rough either. There are stops at 45 and 33.something for crown molding. The bevel action is OK also. The scale for the bevel adjustment is hard to get absolutely perfect, so for precision work use an angle finder of one sort or another. There are no stops on the bevel adjustment.
My saw (which was bought at the orange big-box store) came with a powder-coated stamped steel stand. Very basic but functional. The one gripe that I do have about this saw is that the bolt holes in the saw base do not line up exactly with the holes in the stand. I don't think I've ever used the detachable vise. The cutting capacity is pretty good. It will easily cut a 4"x4".
All in all, I think it is a good middle of the road saw. It's not a seven hundred dollar Bosch, but is alot better than a 99 dollar Ryobi. I've been happy with it. I may eventually upgrade to a saw with more features, but this one has done me well for a while....
4 of 4 people found the following review helpful.
Excellent sawBy The book thief
I purchased this saw about one year ago and it is really an excellent miter saw. Anyone who wants a 12 inch miter saw with a lifetime warranty this is the saw for you. The only problem I see is that the laser only turns on when the blade is running. I would like it to be on before the blade starts or when the cord is plugged in an outlet. Also the dust collection system works great.
3 of 3 people found the following review helpful.
Ridgid qualityBy Rock Star
I have had this saw for a about a year and have cut pine , oak, maple, and bricks ( with the masonry blade) and I can say I never got a bad cut from the saw. It runs smooth and always cuts true. I have other rigid tools and they all preform without issue. I would recommend this tool to contractor or home user without reservation.
See all 5 customer reviews...
No comments:
Post a Comment